Skip to main content

DN8245V Setup Guides

Look for the coloured sticker on your modem box to know which set-up guide fits your service.

Fibre to the node and Fibre to the building(FTTN/FTTB)

Is the sticker on your box yellow? Great – let’s start!

1 - Plug in the cables

  • Plug your power cable into the modem, and then into the power socket. Don’t forget to switch the power socket off first.
  • Next, plug one end of a phone cable into the DSL port on your modem, and the other end into your phone wall socket.
  • It’s time for your phone. With an nbn™ connection, you’ll plug your home phone into the ‘Phone 1’ port on your modem - not the wall socket.
  • You can now use an ethernet cable to connect any devices that won’t be using a Wi-Fi connection.

FTTN

2 - Check the lights

  • Power up your modem by switching on your wall socket and pressing the power button on your modem.
  • Wait 15 minutes for your modem to auto-configure.
  • After 15 minutes, the first four lights (shown in the image below) should be on.
  • If the lights haven’t turned on, turn your modem off and repeat this step.

modem lights

3 - Connect your device

  • It’s time to connect to your Wi-Fi!
  • Look for the ‘SSID’ – your network name, and WLAN Key – your password, on a sticker at the bottom of your modem.
  • Connect your devices to Wi-Fi by searching for the ‘SSID’ and using the ‘WLAN’ key as the security password.

connect devices

You’re all done!

If your internet isn’t working – go through each of the steps again before contacting our tech support team.

Fibre to the premise and Fixed wireless(FTTP/FW)

Is the sticker on your box blue? Great – let’s start!

1 - Plug in the cables

  • Plug your power cable into the modem, and then into the power socket. Don’t forget to switch the power socket off first.
  • It’s time for your phone. With an nbn™ connection, you’ll plug your home phone into the ‘Phone 1’ port on your modem - not the wall socket.
  • Next, plug one end of your ethernet cable into the WAN port on your modem, and the other end into one of the UNI-D ports on your NBN device.
  • You can now use an ethernet cable to connect any devices that won’t be using a Wi-Fi connection.

FFTP

2 - Check the lights

  • Power up your modem by switching on your wall socket and pressing the power button on your modem.
  • Wait 15 minutes for your modem to auto-configure.
  • After 15 minutes, the first four lights (shown in the image below) should be on.
  • If the lights haven’t turned on, turn your modem off and repeat this step.

modem lights

3 - Connect your device

  • It’s time to connect to your Wi-Fi!
  • Look for the ‘SSID’ – your network name, and WLAN Key – your password, on a sticker at the bottom of your modem.
  • Connect your devices to Wi-Fi by searching for the ‘SSID’ and using the ‘WLAN’ key as the security password.

wifi setup

You’re all done!

If your internet isn’t working – go through each of the steps again before contacting our tech support team.

Hybrid Fibre Coaxial(HFC) / Fibre to the Curb (FTTC)

Is the sticker on your box orange? Great – let’s start!

1 - Connect you nbn™ box

HFC and FTTC technology types may come with an additional nbn™ connection box and this device is required to complete your iPrimus connection along with your modem.

Ignoring the modem for a moment, we first need to set up your nbn™ connection box, if it hasn’t been done so already.

Depending on your connection type, your nbn™ connection box will either be black (HFC) or white (FTTC). Please use the guide below that matches your box type.

fttc ncd

White nbn connection box Setup guide

nbn box

Black nbn connection box Setup guide

Once connected please continue with modem setup as below.

2 - Plug in the modem

  • Plug your power cable into the modem, and then into the power socket. Don’t forget to switch the power socket off first.
  • It’s time for your phone. With an nbn™ connection, you’ll plug your home phone into the ‘Phone 1’ port on your modem - not the wall socket.
  • Next, plug one end of your ethernet cable into the WAN port on your modem, and the other end into the network box provided by nbn™.
  • You can now use an ethernet cable to connect any devices that won’t be using a Wi-Fi connection.

hybrix coaxial

3 - Check the lights

  • Power up your modem by switching on your wall socket and pressing the power button on your modem.
  • Wait 15 minutes for your modem to auto-configure.
  • After 15 minutes, the first four lights (shown in the image below) should be on.
  • If the lights haven’t turned on, turn your modem off and repeat this step.

modem lights

4 - Connect your device

  • It’s time to connect to your Wi-Fi!
  • Look for the ‘SSID’ – your network name, and WLAN Key – your password, on a sticker at the bottom of your modem.
  • Connect your devices to Wi-Fi by searching for the ‘SSID’ and using the ‘WLAN’ key as the security password.

connect devices

You’re all done!

If your internet isn’t working – go through each of the steps again before contacting our tech support team.

ADSL Broadband(ADSL)

Is the sticker on your box green? Great – let’s start!

1 - Plug in the cables

  • Plug your power cable into the modem, and then into the power socket. Don’t forget to switch the power socket off first.
  • Next, plug one end of a phone cable into the DSL port on your modem, and the other end into the ADSL modem port on your ADSL filter. Now plug the ADSL filter into your wall phone socket.
  • It’s time for your phone. Plug your phone cable into the local phone port on the ADSL filter.
  • You can now use an ethernet cable to connect any devices that won’t be using a Wi-Fi connection.

adsl

2 - Check the lights

  • Power up your modem by switching on your wall socket and pressing the power button on your modem.
  • Wait 15 minutes for your modem to auto-configure.
  • After 15 minutes, the first four lights (shown in the image below) should be on.
  • If the lights haven’t turned on, turn your modem off and repeat this step.

modem lights

3 - Connect your device

  • It’s time to connect to your Wi-Fi!
  • Look for the ‘SSID’ – your network name, and WLAN Key – your password, on a sticker at the bottom of your modem.
  • Connect your devices to Wi-Fi by searching for the ‘SSID’ and using the ‘WLAN’ key as the security password.

connect device

You’re all done!

If your internet isn’t working – go through each of the steps again before contacting our tech support team.

 

Get in touch

We've got you covered!
Did you know most enquiries can be answered or submitted via our website? Visit our Support Page for more information.
Sales enquires 131 789
9am - 9pm (AEST) Mon - Fri
9am - 6pm (AEST) Sat - Sun
Technical support
9am - 9pm (AEST) Mon - Fri
9am - 6pm (AEST) Sat - Sun
LOG A FAULT ONLINE
Accounts & Billing
9am - 6pm (AEST) Mon - Fri
Click here to get help with Accounts & Billing
E-mail us at [email protected]

 

Start live chat

Download on the App Store   Download on the App Store

Login now or download the iPrimus app from Apple or Google Play store.