Setup Fibre internet with an ONT and Smart Wiring

This page is for customers who will connect directly to their ONT to setup their internet connection

Common Networks that use this setup

  • Opticomm
  • Places Victoria

Connecting your Primus AudioCodes router

  1. Connect an Ethernet cable from the Internet Data Port to your LAN 4/WAN port on the back of the router
  2. Connect the Power cable from the Wall Power Outlet to the Power port on the back of the router.
  3. Press the Power Switch on the back of the router to power on the router
  4. Wait for the Broadband light to come on to confirm the Automatic Configuration of your device (typically 10-30 minutes).
  5. Connect your computer via Cable - Connect an Ethernet cable from your computer to either the LAN 1, LAN 2 or LAN 3 ports on the back of the router. Connect your computer via WiFi - The AudioCodes WiFi settings are displayed on the back of the unit. A guide for Connecting to a WiFi Network can be found on the WiFi Section

 

Router guides

For more guides specific to the router, check out our Hardware section:

  Hardware Home