Netgear WRN2000 Wireless Setup Guide

Router login details:

Address: http://192.168.1.1

Username: admin

Password: password

 

Use this guide to setup, or change Wireless (WiFi) settings on your Netgear WRN2000 router.

You can also use this guide to confirm your wireless network is password protected.

 

Connect your computer to the router via an Ethernet (LAN / Network) cable.

Open up a web browser such as Internet Explorer or Safari.

 

Enter 192.168.1.1 into the address bar, and press enter:

Some description

 

A login screen will appear, use the following details:

 

Username: admin

Password: password

 

Click OK, and log in.

 

This will bring up the Netgear router configuration screen.

Click on ‘Wireless Settings’ on the left menu:

Some description

 

This brings up the wireless settings for the router:

Some description

 

The display name of the network is listed under Name (SSID): – this is the publicly broadcast name of the network.

You can also manually select the wireless channel on this page

iPrimus recommends using “WPA-PSK [TKIP] + WPA2-PSK [AES]” security.

 

The ‘Passphrase” is the wireless password on your network. Change this to a password you know (minimum 8 characters long)

To save settings click “APPLY”

 

You have now setup the Wireless on your Netgear WRN2000 router

The new network should be visible, and you can connect with your new password.