NetComm NB604N

This page is targeted towards the NetComm NB604N modem with Primus firmware for an ADSL connection
This modem will automatically configure itself when connected to an ADSL provisioned line.

Modem Ports

Some description

[A] – DSL port
[B] – Reset button
[C] – Ethernet 1-4
[D] – Power plug
[E] - Power switch


Important Lights for Setup

Some description

[A] – Power – Indicates power is supplied to the modem OK
[B] – DSL – Indicates a connection to the ADSL exchange
[C] – Internet – Indicates a connection to the internet
[D] – Ethernet 1-4 – Indicates connection to an Ethernet enabled device
[E] – WLAN – Indicate Wireless is broadcasting

Connecting your ADSL Modem

  1. Connect ADSL Line filters to all Telephone devices in use in the house (Guide: Link to Filter Guide)
  2. Connect Phone Cable from the DSL port on the modem to your ADSL Filter
  3. Connect Yellow Ethernet cable provided to your Computers Ethernet port and then to any Ethernet port on your modem
  4. Connect Power cable to the power plug on the back of the modem and then into your wall power outlet
  5. Press the Power Switch on the back of the modem to power on the modem
  6. Wait 10-30 minutes for the Modem to automatically configure itself

Quick Modem Details

IP: 192.168.1.1
Username: admin
Password admin

As this modem automatically configures itself there is no need to manually configure the device.