Configure Linksys E1000 - E3000 for Fibre Internet Connection

 

Cable configuration

WAN Port – This port needs to connect to your Internet Connection. (NOTE: For NBN Co customer this will connect to the NTD)

Ethernet Port – To configure this device you must connect the router to your computer for the setup.

 

Some description

 

 

Setup

Once the Linksys E1000, E2000 or E3000 is powered on, through your internet browser connect to

URL: http://192.168.1.1

Username: admin

Password: admin

 

Some description

 

Once you change Automatic Configuration - DHCP to PPPoE, you will be able to input your username and password.

 

Username: username@iprimus.com.au

Password: iPrimus Password

Service Name: iPrimus

 

Some description

 

Scroll down the bottom of the page and click on Save Settings

 

Some description

 

Now that your router is configured the WAN light should come on solid

You should now be able to browse.

 

If the WAN light is not coming on and your Internet service has been provisioned correctly, contact Technical Support.